Are you at the point in your DIY house build where you need to install fascia around the perimeter of your roof, but you have no one to help you? Believe it or not, you don’t need a helper for this part of the project. You can put up fascia boards by yourself – even […]
How To Install Fascia Read More »
In this article, I’m going to guide you through the process of installing a drip edge and a rake edge on a roof. This is one of the easiest steps in finishing off a roof on a DIY house, so let’s get to it! As always, remember to CHECK YOUR LOCAL BUILDING CODES before starting
How To Install Drip Edge On A Roof Read More »
Installing OSB sheathing on the roof of your DIY house is not hard to do. In this article, I show you how simple it is by guiding you through my sheathing process, step by step. I also go over some important safety tips that you should follow whenever you’re working on a tall structure. Once
How To Install OSB Roof Sheathing Read More »
Building out the valley framing for a small roof on your DIY house is easy, but it does involve a lot of steps. That’s why I’m dedicating this entire article to explaining how to get through this process, step by step, so that you can do it yourself! As always, be sure to ALWAYS CHECK
How To Build A Small Roof – Valley Roof Framing Read More »
In this article, I’m going to take you step by step through the process of building roof rake ladder overhangs for your DIY house gable trusses on the ground. This may seem like a daunting build for a beginner DIYer, given the size of the project. But once you understand the process, you’ll get the
How To Build Roof Rake Ladder Overhangs On The Ground Read More »
If you’ve reached the point in your DIY house building project where you need to build a wall with a door opening, this article will teach you how to do just that. As usual, I’ll be basing my framework measurements on the most common layout, which is 16 inches on center. Be sure to ALWAYS
How To Build A Wall With A Door Opening With 16″ On Center (O.C) Layout Read More »
Building jack studs is a crucial part of framing walls in a construction project. Jack studs are the vertical framing members that are used in conjunction with king studs to support a header above an opening, such as a door or window. In this step by step guide, we will walk you through the process
How To Build Jack Studs For Door Framing Read More »
It may sound redundant, but the foundation (which includes the sill plate) of your house is, well, the foundation of everything. Without it, your entire DIY house could shift or even tear away during extreme weather conditions, like tornadoes and hurricanes. To make your foundation whole, you need to install a sill plate. This is
How To Install A Sill Plate On A Foundation Read More »
If you’re taking the DIY route of building a house or a similar structure, you must learn how to build an interior wall with a door. But before you can do that, you must determine whether the wall will be load bearing or non-load bearing. If you’re not sure about the difference, don’t worry. I
How To Build An Interior Wall With A Door – Load Bearing Vs Non-Load Bearing Doorway Read More »
Anyone who has ever attempted a DIY project knows that a tape measure is an essential tool. However, reading a tape measure can be tricky, especially for beginners. If you’ve ever tried to measure something and got lost in the numbers, don’t worry – with a little practice, you’ll be able to quickly and easily
How To Read A Tape Measure (The EASY Way) Read More »
